Hello I have recently bought a 1965 mustang coupe with a 1967 302 and a 4 speed tranny. I am trying to get the clutch to fully disengage because some one has made their own clutch rods (upper and lower) and cut and welded the equilizer bar. So my question is what year clutch rods (upper and lower)And equilizer bar do I need. Thank You Tony  

If you haven't got this figured out yet I'd suggest you go on the internet and pull up National Parts Depot (NPD).  They'll more than likely have what you need.  

True, everything you need for this is available through any reputable Mustang parts dealer. I would replace it all using the 65 parts.