Ok guys I have a 1979 column tilt,my wiring is ?? the plugs push right into the column except the wiper-wash. Now I have an 86 column. and the wiper- wash looks the same but the pins are in different places in the plug . 79 wire plug, 86 wire plug. for a washer wiper. Ok the two wiper arm are and look the same but the plugs are differant,can I repin them to work in this column 1979.wiring fits the 86 wiper arm but not the 79. the plug is worng.. help I don't know what eles to *** help......................................my ass please..
are both the wiper switches for intermittent wipers????they had both types back then..non intermittent and intermittent.. that will prevent them from plugging in.. as there are differences in the electrical connector..i don't know if you have intermittent wipers... i had a 83 tbird that the intermittent box failed .. i was able to replace the wiper switch with a non intermittent wiper switch just by unplugging the intermittent box as the wiper switch connector pigtail was long enough to reach .. but it was just tucked away where it was connected to the delay box harness..like this..non delay wipers=========/ non delay wiper switch...delay wipers============//=== delay box=====/ delay wiper switch.
I don't have (anymore, must have grown legs) a '79 wiring diagram, but I do have the '86 EVTM. This is the connector pinout for the '86 with intermittent. The non-intermittent is different, so be aware of which one you have. This should help you determine which wire does what and get you repinned and working.HTH...Mark.
Mark HoulahanTechnical Editor for:-Modified Mustangs & Fords Magazine-Mustang Monthly Magazine1965 FFR Roadster 427W/TKO-600 5-speed1966 Mustang 289-4V/C4 Auto1968 Mustang 4.6L Three-Valve/5R55S Auto1990 Mustang 306/AOD2002 Explorer Sport Trac 4.0L V-6/5R55 Auto