|
|
Item Posts
Sort Order
|
|
|
|
Ford Racing w/Tremec TKO-600
|
rdt1957
New User
| Posts: 7
| Joined: 08/10
Posted: 02/07/13
09:00 PM
|
|
So I bought a Ford Racing 363 (stroked 302) with a 5 speed Tremec to put in my 65 FB. Anybody got any words of wisdom? Is that a decent combo?
|
|
|
|
|
Posted: 02/08/13
08:13 AM
|
|
The 363 is a heck of an engnie for an early Mustang. You'll love the power!
Decent combo doesn't even start to paint the proper picture! Good luck with the project and be sure to post photos!
Mark
.
Mark Houlahan
Technical Editor for:
-Modified Mustangs & Fords Magazine
-Mustang Monthly Magazine
1965 FFR Roadster 427W/TKO-600 5-speed
1966 Mustang 289-4V/C4 Auto
1968 Mustang 4.6L Three-Valve/5R55S Auto
1990 Mustang 306/AOD
2001 Ranger SuperCab 4x4 3.0L V-6/5R44E Auto
2002 Explorer Sport Trac 4.0L V-6/5R55 Auto
|
|
|
|
rdt1957
New User
| Posts: 7
| Joined: 08/10
Posted: 02/26/13
07:29 PM
|
|
I wish I could figure out how to post a photo.
|
|
|
|
|
|
rdt1957
New User
| Posts: 7
| Joined: 08/10
Posted: 02/26/13
07:46 PM
|
|
I bought a Ford Crate engine through CJPONY: 363 CUBIC INCH 500 HP BOSS CRATE ENGINE FRONT SUMP M-6007-Z363FT. It has Cylinder Heads Ford Racing Aluminum "Z" Cylinder Heads M-6049-Z304DA (ex. port raised .625"). They also sold me headers (Hooker 6111HKR). The headers don't seem to fit unless I am doing something wrong. Their customer support is not replying to my emails. Does anyone know which headers will fit my '65 FB with the engine noted above. I have tried both the 65 and 66 motor mounts. Thx
|
|
|
|
|
|
|